After you are done with the drywall installation and all the processes involved, such as taping, mudding, texturing, and sanding, you need to paint it with the colors you love. Painting drywall to achieve a flawless appearance can be hard if you have little skills or knowledge to approach it. In general, the outcome’s quality depends on the techniques you apply and the type of paint you are using.

You have the paint already. Read through to know the tips for painting drywall for a flawless and even finish.

Tip: Painting drywall should only be done after you have applied a primer on the walls.

Without a primer, your paint will not be absorbed evenly. The corners will also be visible through the paint, regardless of how many coats you apply.

Clean the drywall first

Drywall is usually chalky and full of dust from the joint compound. You cannot ignore the process of cleaning the drywall to remove these problems. Otherwise, you will have a rough spot to paint on.

The best way to remove them is through the drywall sanding process. Drywall sanding can be done using a soft sponge.

The dust can be toxic; remember to wear protective masks to protect your nose from inhaling the dust.

Removing dust

While you can use a simple broom to remove the dust, this method can expose you to the dust. Instead, use a brush extension. A sponge can remove the remaining dust. Avoid wiping the drywall with an excessively wet sponge. It may damage the underneath tape.

Apply the right drywall primer

This is one of the most important steps you must perform before painting your drywall. Avoid using the general latex primer. The best primer is the one specified to be appropriate for bare drywall. Roll one coat of the primer-sealer on the

drywall surface before you begin painting. Applying primer will not only create a uniform finish but also enhance the paint color.

Use appropriate rollers for painting.

The thickness of a roller nap is as important as priming if you want to see the best outcome. Using a very thick roller leaves “ropes” of a drywall’s surface and stippling texture.

The right roller nap ideally should have these specifications:

● 9-inch long

● ½ inch roller nap

● Lint-free

How to roll perfectly

Roll the primer from top to bottom. Avoid rolling from the middle of the wall.

Apply one coat of primer and two coats of paint.

Ensure proper lighting

When working with proper lighting, you can easily see defects while painting and change them on the spot. Besides, ensure you are working with an interior temperature above 60°F before you begin painting.

This is because a change in temperature causes movements in walls and may lead to creating new defects.

Need professional drywall painting service?

Golden State Drywall Repair Pros has a team of professional painters, qualified and experienced for this job. If you are unsure of doing it yourself, we are just a call away.

Call us at (5100 250-5447 today for drywall painting services, drywall installation, and drywall repair in Oakland.